FiberLabs Inc

L-band amplifier (EDFA, 1U Rack Mount)

L-band amplifier (EDFA)
  • L-band amplifier (EDFA)
  • L-band amplifier (EDFA)
  • L-band amplifier (EDFA)
  • L-band amplifier (EDFA)
  • L-band amplifier (EDFA)
  • L-band amplifier (EDFA)

L-band amplifier (EDFA, 1U Rack Mount)

The AMP-FL5001-LB Series is a 19-inch rack mount EDFA in the L-band. Combined with the AMP-FL501x-CB series C-band EDFA, it enables the expansion of transmission bandwidth beyond the C-band. This L-band amplifier offers a high output power and flat signal gain over a wide range covering 1560-1610nm, enabling highly reliable WDM/DWDM transmission in the L-band.

Also available in bench-top and OEM module format.

Product Type : Rack Mount

Operating Wavelength:1560 nm ~1610 nm

Contact Sales

FEATURES

  • Proven in Valious Deployment Conditions (from R&D to Actual Network)
  • Monitoring/Logging/Interlocking Function
  • RS-232C
  • SNMP Option

APPLICATIONS

  • Telecom Network
  • Datacom Network
  • Increasing Link Budget
  • Loss Compensation

MAIN SPECS

Product NumberOperating
WaveLength
(nm)
Nominal
WL
(nm)
Output
Power
(dBm)
(*1)
Gain
(dB)
(*2)
NF
(dB)
(*2)
IN/OUT
Fiber
Standard
Connector
IN/OUT
Isolator
Std. Dimension
(H x W x D, mm)
(*3)
AMP-FL5001-LB-131560 to 16101580≥ +13≥ 25≤ 6SMF (*4)SC/PCBuilt In43 x 440 x 403
AMP-FL5001-LB-161560 to 16101580≥ +16≥ 30≤ 6SMF (*4)SC/PCBuilt In43 x 440 x 403
AMP-FL5001-LB-191560 to 16101580≥ +19≥ 35≤ 6SMF (*4)SC/PCBuilt In43 x 440 x 403
AMP-FL5001-LB-221560 to 16101580≥ +22≥ 35≤ 6SMF (*4)SC/PCBuilt In43 x 440 x 403


(*1) Input Power: 0 dBm @ Nominal Wavelength
(*2) Input Power: -30 dBm @ Nominal Wavelength
(*3) Does not include protrusions
(*4) G.652 compliant (e.g. SMF28)

OTHER SPECS

AttributeSpecification
Control ModeACC (Auto Current Control) and ALC (Auto Light Control)
Monitor & AlarmInput power / Output power / Pump LD current / Pump LD temperature / Case temperature / Power-Supply-Unit voltage (alarm only) / Fan Rotation (alarm only)
Safety FunctionInterlock with input level Alarm
Remote InterfaceRS-232C / Relay terminal for alarm
TemperatureOperation : 0 to 40 ºC / Storage : -10 to 60 ºC
Power SupplyAC 100 to 240 V (50/60 Hz), Redundant and Hot-Swap
Humidity5 to 80 % RH (non-condensing)
Other Environmental ConditionsIndoor use / Overvoltage category: II / Altitude:
Safety StandardsIEC 60825-1 (JIS C 6802) / CE marking (EN 61010-1 / EN 61326-1)

Options

NumberOption
-011FC/PC Connector
-012FC/APC Connector
-014SC/APC Connector
-019Other Cusomized Connector
-023DC 48V Hot Swap Power Supply
-029Other Cusomized Power Supply
-092Ethernet Interface
-093Reflection Monitor and Interlock
-151Front Control Panel and Display

Gain/noise figure vs. wavelength (FL5001-LB-13)
Gain/NF/output power vs. input power @1580 nm (FL5001-LB-13)
Gain/noise figure vs. wavelength (FL5001-LB-16)
Gain/NF/output power vs. input power @1580 nm (FL5001-LB-16)
Gain/noise figure vs. wavelength (FL5001-LB-19)
Gain/NF/output power vs. input power @1580 nm (FL5001-LB-19)
Gain/noise figure vs. wavelength (FL5001-LB-22)
Gain/NF/output power vs. input power @1580 nm (FL5001-LB-22)

REGISTERED USERS ONLY

  • NWAMP_Operating-Manual_v1_6_0_0_en.pdf
  • NWAMP_CommandReferencewithout-NWIF_v1_2_0_0_en.pdf
  • AMP-FL-RM1U-001_drawing_AC.pdf