Product release of 23-dBm O-band PDFA

Announcement In our previous posts (link 1, link 2), we have reported our develop status of...

How to handle fluoride fiber

How to strip fluoride fiber coating How to cleave fluoride fiber ...

O-band PDFA and Tuable filter for transceiver tesitng

Summary The O-band transceivers have been extensively used for high-speed Ethernet. The primary...

O-band optical amplifier for monitoring 100G Ethernet

Summary This article shows an application of O-band optical fiber amplifier (PDFA) for enha...

O-band optical preamplifier for 100G Ethernet

This technical article describes an application example of FiberLabs PDFA for enhancing the li...

O-band booster Optical Amplifier for 100G Ethernet

Summary This technical article describes an application of FiberLabs PDFA for enhancing the...

Optical Fiber Amplifier for 100G/400G Ethernet

Introduction IEEE 100GBASE-LR4 The 100GBASE-LR4 standard is defined by IEEE as an Ethern...

Uni-directional CWDM amplifier: installation example

Eight-wavelength CWDM Amplifier CWDM transmission enables low-cost WDM transmission using u...

O-band PDFA achieves 500-mW output

Introduction We have released high power O-band amplifier (+23 dBm (200 mW) PDFA FL-AMP8612...

Performance of 23-dBm PDFA for LWDM8 and CWDM4 wavelength range

Introduction In our previous post we did the first preview of our +23 dBm (200 mW) PDFA FL-AMP861...

Unvailing 23-dBm O-band PDFA prototype

Introduction ...

Development of elliptical-core PM ZBLAN fiber

This post introduces polarization-maintenance ability of an elliptical-core PM ZBLAN fiber tha...