FiberLabs Inc

O-band PDFA

O-band PDFA
  • O-band PDFA

O-band PDFA

The AMP-FL56XX-OB/OP series PDFA is a versatile O-band amplifier, primarily designed for network applications such as data centers, access/metro networks. The amplifier can be used in WDM configuration, and its amplification performance does not depend on signal formats, i.e. ranging from legacy 100 Mbps IM-DD signal to 100GBASE-LR4 signal and 400GBASE-LR8 PAM4 signal.

Product Type : Rack Mount

Operating Wavelength:1280 nm ~1320 nm

Contact Sales

FEATURES

  • Best performing O-band Fiber Amplifier in Market
  • Proven Reliability by Actual Network Deploymnet
  • High Gain and Low NF
  • Monitoring/Logging/Interlocking Function
  • RS-232C
  • SNMP Option

APPLICATIONS

  • Telecom Network
  • Datacom Network
  • Increasing Link Budget
  • Loss Compensation

MAIN SPECS

Product Number Operating
WaveLength
(nm)
Nominal
WL
(nm)
Output
Power
(dBm)
(*1)
Gain
(dB)
(*2)
NF
(dB)
(*2)
IN/OUT
Fiber
Standard
Connector
IN/OUT
Isolator
Std. Dimension
(H x W x D, mm)
(*3)
AMP-FL5601-OB-13 1280 to 1320 1310 ≥ +13 Typ. 18 ≤ 7 SMF (*4) SC/PC Built In 43 x 440 x 403
AMP-FL5601-OB-16 1280 to 1320 1310 ≥ +16 Typ. 24 ≤ 7 SMF (*4) SC/PC Built In 43 x 440 x 403
AMP-FL5601-OB-20 1280 to 1320 1310 ≥ +20 Typ. 40 ≤ 7 SMF (*4) SC/PC Built In 43 x 440 x 403
AMP-FL5611-OP-10 1280 to 1320 1310 Typ. +8 ≥ 10 ≤ 6.7 SMF (*4) SC/PC Built In 43 x 440 x 403
AMP-FL5611-OP-15 1280 to 1320 1310 Typ. +10 ≥ 15 ≤ 6.7 SMF (*4) SC/PC Built In 43 x 440 x 403


(*1) Input Power: 0 dBm @ Nominal Wavelength
(*2) Input Power: -30 dBm @ Nominal Wavelength
(*3) Does not include protrusions
(*4) G.652 compliant (e.g. SMF28)

OTHER SPECS

Attribute Specification
Control Mode ACC (Auto Current Control) and ALC (Auto Light Control)
Monitor & Alarm Input power / Output power / Pump LD current / Pump LD temperature / Case temperature / Power-Supply-Unit voltage (alarm only) / Fan Rotation (alarm only)
Safety Function Interlock with input level Alarm
Remote Interface RS-232C / Relay terminal for alarm
Temperature Operation : 0 to 40 ºC / Storage : -10 to 60 ºC
Power Supply AC 100 to 240 V (50/60 Hz), Redundant and Hot-Swap
Humidity 5 to 80 % RH (non-condensing)
Other Environmental Conditions Indoor use / Overvoltage category: II / Altitude:
Safety Standards IEC 60825-1 (JIS C 6802) / CE marking (EN 61010-1 / EN 61326-1)

Options

Number Option
-011 FC/PC Connector
-012 FC/APC Connector
-014 SC/APC Connector
-019 Other Cusomized Connector
-023 DC 48V Hot Swap Power Supply
-029 Other Cusomized Power Supply
-092 Ethernet Interface
-093 Reflection Monitor and Interlock
-151 Front Control Panel and Display

Gain/noise figure vs. wavelength (FL5601-OB-16)
Gain/noise figure vs. wavelength (FL5601-OB-16)
Gain/NF/output power vs. input power @1310 nm (FL5601-OB-16)
Gain/NF/output power vs. input power @1310 nm (FL5601-OB-16)
Gain/noise figure vs. wavelength (FL5601-OB-20)
Gain/noise figure vs. wavelength (FL5601-OB-20)
Gain/NF/output power vs. input power @1310 nm (FL5601-OB-20)
Gain/NF/output power vs. input power @1310 nm (FL5601-OB-20)

REGISTERED USERS ONLY

  • NWAMP_Operating-Manual_v1_6_0_0_en.pdf
  • NWAMP_CommandReferencewithout-NWIF_v1_2_0_0_en.pdf
  • AMP-FL-RM1U-001_drawing_AC.pdf