FiberLabs Inc

1030-nm-band amplifier (YDFA, Bench Top)

1030-nm-band amplifier (YDFA)
  • 1030-nm-band amplifier (YDFA)
  • 1030-nm-band amplifier (YDFA)
  • 1030-nm-band amplifier (YDFA)
  • 1030-nm-band amplifier (YDFA)

1030-nm-band amplifier (YDFA, Bench Top)

The AMP-FL8521-XB-20 is an optical fiber amplifier for 1030 nm band. The amplifier has Yb-doped fiber as the gain medium and outputs 20 dBm or more over the wavelength range from 1020 to 1080 nm.

Product Type : Bench Top

Operating Wavelength:1020 nm ~1080 nm

Contact Sales

FEATURES

  • High Gain around 1-micron
  • Turn-Key Operation
  • RS-232C and GP-IB

APPLICATIONS

  • Laboratory Use
  • Test and Measurement
  • Integration in System

MAIN SPECS

Product NumberOperating
WaveLength
(nm)
Nominal
WL
(nm)
Output
Power
(dBm)
(*1)
Gain
(dB)
(*2)
NF
(dB)
(*2)
IN/OUT
Fiber
Standard
Connector
IN/OUT
Isolator
Std. Dimension
(H x W x D, mm)
(*3)
AMP-FL8521-XB-201020 to 10801030≥ +20≥ 30N/AHI1060FC/APCOutput Only88 x 260 x 350


(*1) Input Power: 0 dBm @ Nominal Wavelength
(*2) Input Power: -30 dBm @ Nominal Wavelength
(*3) Does not include protrusions

OTHER SPECS

AttributeSpecification
Control ModeACC (Auto Current Control) and ALC (Auto Light Control)
Monitor & AlarmOutput power / Pump LD current / Pump LD temperature / Case temperature
Safety FunctionRemote Interlock
Remote InterfaceRS-232C / IEEE488.1 (GP-IB)
TemperatureOperation : 0 to 40 ºC / Storage : -10 to 60 ºC
Power SupplyAC 100 to 240 V (50/60 Hz)

Options

NumberOption
-014SC/APC Connector
-0721030-nm Input Isolator

Gain/noise figure vs. wavelength (FL8521)

REGISTERED USERS ONLY

  • Operations Guide_v5_0_0_1_en
  • Programing Manual ver 4.0
  • AMP-T-BT-006_drawing