The ASE-1300-01 and ASE-FL7611 are O-band ASE light sources for the 1.3 μm band. The use of Pr-doped fluoride fiber realizes the maximum total output of 8 dBm in the wavelength range from 1270 to 1330 nm. ASE sources exhibit low degree of polarization (DOP) than super luminescent diodes (SLDs), and thus are particularly useful for test & measurement purposes in which low DOP is required. FiberLabs’ ASE sources feature high spectral density, stable output power, and stable spectrum; allowing users to conduct various measurements with high signal-to-noise ratio and high accuracy.
High spectral density
Optical component characterization
■ Bench-Top type specifications
|Total Output Power||>0dBm ( >1.0mW)||>+8dBm ( >6.3mW)|
|Output Wavelength Band||O-Band|
|Power Stability *2||<+/-0.01dB|
|Output Optical Connector||FC/PC|
|Size(mm) *3||88(H) x 260(W) x 350(D)|
|Operating Temperature||0 ~ 40°C|
|Storage Temperature||-10 ~ 60 °C|
|Power Supply||AC 100 ~ 240V (50/60Hz)|
*1 Peak wavelength
*2 15 Min. after 2 hour warm-up
*3 Not including protrusions
- Specifications are subject to change.
- All functions, characteristics and exterior design can be optimized according to customer requirements, and please feel free to contact FiberLabs sales engineers.