FiberLabs Inc

CWDM amplifier (4-λ BiDi, In-Line, 1U Rack Mount)

CWDM Amplifier (4-λ BiDi, In-Line)
  • CWDM Amplifier (4-λ BiDi, In-Line)
  • CWDM Amplifier (4-λ BiDi, In-Line)
  • CWDM Amplifier (4-λ BiDi, In-Line)
  • CWDM Amplifier (4-λ BiDi, In-Line)
  • CWDM Amplifier (4-λ BiDi, In-Line)
  • CWDM Amplifier (4-λ BiDi, In-Line)

CWDM amplifier (4-λ BiDi, In-Line, 1U Rack Mount)

The AMP-FL5711-I4S & AMP-FL5711-I4L are specially designed inline amplifiers to extend a reach of bi-directional CWDM transmission systems over a single dark fiber.


The AMP-FL5711-I4S amplify transmitting signals of 1471, 1491, 1511 and 1531 nm, and pass through recieving signals of 1551, 1571, 1591 and 1611nm with low insertion loss. The AMP-FL5711-I4S & AMP-FL5711-I4L work at the oppsite site. Combination of these inline amplifiers with any CWDM transmitter surely extends transmission distance regardless of signal format and data rate.

Product Type : Rack Mount

Operating Wavelength:1470 nm ~1610 nm

Contact Sales

FEATURES

  • Optimized for CWDM wavelengths
  • Monitoring/Logging/Interlocking Function
  • RS-232C
  • SNMP Option

APPLICATIONS

  • Telecom Network
  • Datacom Network
  • Increasing Link Budget
  • Loss Compensation

MAIN SPECS

Product NumberOperating
WaveLength
(nm)
Nominal
WL
(nm)
Output
Power
(dBm/ch)
(*1)
Gain
(dB)
(*2)
NF
(dB)
(*2)
IN/OUT
Fiber
Standard
Connector
IN/OUT
Isolator
Std. Dimension
(H x W x D, mm)
(*3)
5711-I4S1471 ± 6.5
1491 ± 6.5
1511 ± 6.5
1531 ± 6.5
1471
1491
1511
1531
≥ +0N/AN/ASMF (*4)SC/PCBuilt In43 x 440 x 403
5711-I4L1551 ± 6.5
1571 ± 6.5
1591 ± 6.5
1611 ± 6.5
1551
1571
1591
1611
≥ +0N/AN/ASMF (*4)SC/PCBuilt In43 x 440 x 403


(*1) Input Power: -18 dBm/ch, all four channels amplified simultaneously
(*2) Not specified
(*3) Does not include protrusions
(*4) G.652 compliant (e.g. SMF28)

OTHER SPECS

AttributeSpecification
Control ModeACC (Auto Current Control)
Monitor & AlarmInput power / Output power / Pump LD current / Pump LD temperature / Case temperature / Power-Supply-Unit voltage (alarm only) / Fan Rotation (alarm only)
Safety FunctionInterlock with input level Alarm
Remote InterfaceRS-232C / Relay terminal for alarm
TemperatureOperation : 0 to 40 ºC / Storage : -10 to 60 ºC
Power SupplyAC 100 to 240 V (50/60 Hz), Redundant and Hot-Swap
Humidity5 to 80 % RH (non-condensing)
Other Environmental ConditionsIndoor use / Overvoltage category: II / Altitude:
Safety StandardsIEC 60825-1 (JIS C 6802) / CE marking (EN 61010-1 / EN 61326-1)

Options

NumberOption
-011FC/PC Connector
-012FC/APC Connector
-014SC/APC Connector
-019Other Cusomized Connector
-023DC 48V Hot Swap Power Supply
-029Other Cusomized Power Supply
-092Ethernet Interface
-093Reflection Monitor and Interlock
-151Front Control Panel and Display

REGISTERED USERS ONLY

  • NWAMP_Operating Manual_v1_6_0_0_en
  • NWAMP_CommandReference(without NWIF)_v1_2_0_0_en
  • AMP-FL-RM1U-001_drawing_AC