FiberLabs Inc

S-band amplifier (TDFA, 1U Rack Mount)

S-band amplifier (TDFA)
  • S-band amplifier (TDFA)
  • S-band amplifier (TDFA)
  • S-band amplifier (TDFA)
  • S-band amplifier (TDFA)
  • S-band amplifier (TDFA)
  • S-band amplifier (TDFA)

S-band amplifier (TDFA, 1U Rack Mount)

The AMP-FL52xx-SB series is S-band fiber amplifier designed to meet the need for the next generation optical communication band beyond the C-band and L-band. This S-band amplifier produces high signal gain over a wide bandwidth, covering 1460-1520nm, by utilizing propriatary fluoride fiber TDFA technology.

The rack-mout version is mainly designed for deployment in optical network. It can also be used for network experiments where footprint is an issue. It has been used for a number of hero experiments in ultra-wideband DWDM transmission, conducted by many prestigious research institutes all over the world.

Now we also offer a gain-flattened model, AMP-FL5221-SB-19-W, primarily designed for S-band DWDM application.

Also available in bench-top and OEM module format.

Product Type : Rack Mount

Operating Wavelength:1460 nm ~1520 nm

Contact Sales

FEATURES

  • Only S-band Fiber Amplifier in Market
  • High Gain and Low NF
  • Monitoring/Logging/Interlocking Function
  • RS-232C
  • SNMP Option

APPLICATIONS

  • Telecom Network
  • Datacom Network
  • Increasing Link Budget
  • Loss Compensation

MAIN SPECS

Product NumberOperating
WaveLength
(nm)
Nominal
WL
(nm)
Output
Power
(dBm)
(*1)
Gain
(dB)
(*2)
Gain
Flatness
(dB)
NF
(dB)
(*2)
IN/OUT
Fiber
Standard
Connector
IN/OUT
Isolator
Std. Dimension
(H x W x D, mm)
(*3)
AMP-FL5201-SB-131460 to 15001480≥ +13Typ. 13N/A≤ 7SMF (*4)SC/PCBuilt In43 x 440 x 403
AMP-FL5201-SB-161460 to 15001480≥ +16Typ. 16N/A≤ 7SMF (*4)SC/PCBuilt In43 x 440 x 403
AMP-FL5201-SB-191460 to 15001480≥ +20Typ. 19N/A≤ 7SMF (*4)SC/PCBuilt In43 x 440 x 403
AMP-FL5221-SB-161470 to 15201490≥ +16Typ. 25N/A≤ 7SMF (*4)SC/PCBuilt In43 x 440 x 403
AMP-FL5221-SB-191470 to 15201490≥ +19Typ. 30N/A≤ 7SMF (*4)SC/PCBuilt In43 x 440 x 403
AMP-FL5221-SB-19-W1470 to 15201490≥ +19Typ. 24≤ 3 (*5)≤ 7SMF (*4)SC/PCBuilt In43 x 440 x 403


(*1) Input Power: 0 dBm @ Nominal Wavelength
(*2) Input Power: -30 dBm @ Nominal Wavelength
(*3) Does not include protrusions
(*4) G.652 compliant (e.g. SMF28)
(*5) Defined by gain difference of 1471 and 1511 nm, when signals at 1471, 1491, 1511nm are launched at 0 dBm/ch input

OTHER SPECS

AttributeSpecification
Control ModeACC (Auto Current Control) and ALC (Auto Light Control)
Monitor & AlarmInput power / Output power / Pump LD current / Pump LD temperature / Case temperature / Power-Supply-Unit voltage (alarm only) / Fan Rotation (alarm only)
Safety FunctionInterlock with input level Alarm
Remote InterfaceRS-232C / Relay terminal for alarm
TemperatureOperation : 0 to 40 ºC / Storage : -10 to 60 ºC
Power SupplyAC 100 to 240 V (50/60 Hz), Redundant and Hot-Swap
Humidity5 to 80 % RH (non-condensing)
Other Environmental ConditionsIndoor use / Overvoltage category: II / Altitude:
Safety StandardsIEC 60825-1 (JIS C 6802) / CE marking (EN 61010-1 / EN 61326-1)

Options

NumberOption
-011FC/PC Connector
-012FC/APC Connector
-014SC/APC Connector
-019Other Cusomized Connector
-023DC 48V Hot Swap Power Supply
-029Other Cusomized Power Supply
-092Ethernet Interface
-093Reflection Monitor and Interlock
-151Front Control Panel and Display

Gain/noise figure vs. wavelength (FL5201-SB-13)
Gain/NF/output power vs. input power @1490 nm (FL5201-SB-13)
Gain/noise figure vs. wavelength (FL5201-SB-16)
Gain/NF/output power vs. input power @1490 nm (FL5201-SB-16)
Gain/noise figure vs. wavelength (FL5221-SB-16)
Gain/NF/output power vs. input power @1490 nm (FL5221-SB-16)
Gain/noise figure vs. wavelength (FL5221-SB-19)
Gain/NF/output power vs. input power @1490 nm (FL5221-SB-19)
Amplification characteristics for WDM signal (FL5221-SB-19-W)

REGISTERED USERS ONLY

  • NWAMP_Operating Manual_v1_6_0_0_en
  • NWAMP_CommandReference(without NWIF)_v1_2_0_0_en
  • AMP-FL-RM1U-001_drawing_AC